Perfecting the Satin Stitch

The Satin Stitch can be used to great effect in counted thread work when grouped together side by side as a filling stitch

12483451_1195657007130314_1482423686_n

There are many geometric designs but for this tutorial we will look at a small diamond shape.

Satin stitches as charted

The diagram above is how the shape would be shown on a chart when each square represents two threads.

The diagram below shows the shape when each square represents one thread. We will need 11 stitches to create the shape and cover all the threads of the linen.

Satin stitches as sticthed 2

Start with either a waste knot or pin stitch with one thread.

Satin stitches as sticthed3

Start at 1 and not the left hand side tip of the diamond shape which has be marked with “0”.  End on the 11th stitch as again there is no stitch at the right hand side diamond tip.

12468043_1195656980463650_1082842420_n

For better coverage stitch back from right to left.

Satin stitches as sticthed 7

Your satin stitch should be smooth and the fabric well covered. If it is not you can make another pass back through the shape.

12483451_1195657007130314_1482423686_n

End by burying the thread under the stitches on the back of your fabric. Done neatly this stitch is reversible.

Sometimes we need to cover a slub in the linen which causes a gaping in our stitch.

12468163_1195657053796976_65797007_n

We can do this by laying a diagonal stitch on the first pass through the shape after the 3rd stitch then going back to work the 4th.

Satin stitches slub

When you make the return pass from right to left  the diagonal stitch and the slub will be covered.

12463446_1195657107130304_405695113_n

We hope that you enjoyed this short tutorial.

4 thoughts on “Perfecting the Satin Stitch

Leave a Reply

Your email address will not be published. Required fields are marked *